How To Solve ASC System Service Required?

Have you ever wondered what the ASC system Service Required light on your dashboard means, why it turned on, or how to fix it?

The majority of the vehicles we use nowadays have a separate, fancy system that acts as protection and guarantees the stability of the vehicle. 

The ASC makes sure that stability control and traction control cooperate to preserve vehicle control and traction.

This technology has limitations just like any other system, and it will never be able to assist you in maintaining traction and vehicle control. 

Driving with hesitation could result in collisions. The driver has a responsibility to drive defensively. 

On the dash, the ASC system service required notification signals that maintenance is necessary for the system. 

To learn more about the ASC system service required message and how to resolve it, continue reading.

Main Functions of the ASC System

Wheel speed and brake pressure are inputs that the ASC system controls.

As soon as there is a considerable loss in traction, ASC also modifies the engine power to compensate for the loss and maintain active control of the vehicle.

The light on the instrument panel will blink to signal a dangerous scenario when ASC problems occur.

You must slow down for safety reasons since, in particular, the quantity of wheel slip is insufficient.

If you find the right remedy to the problem, the car will start rough and eventually smooth out. Or the traction control feature will activate to make sure the engine has enough pulling power.

A defective ABS wheel speed sensor is the most frequent cause, excluding those issues. You must pay attention to the brake pedal squeaking and use the proper repair technique.

Additionally, there are additional uncommon but still probable events like a broken steering angle sensor, blown fuse, or an ABS pump that isn’t working.

An ASC service for your car can be avoided if you are recognized than if you are unknown.

Why The ASC System Service Required Light On?

ASC lights may come on automatically or if your automobile is not maintained properly. In rare circumstances, turning off and back on the automobile could fix a service light. The following are a few of the most frequent issues that set off the ASC notification light:

Power outage

Although unrelated, electrical shorts like the problem with the brake light bulb can cause the ASC alert signals. 

This can be due to connector corrosion or aftermarket LED bulbs with the incorrect resistance. A fuse that blew in the brake light would produce a similar effect.

ABS Wheel Speed Sensor

Data about the wheel speed from the ASC computer is provided via the ABS sensor issue. Each of its four sensors is situated at the wheel.

These sensors have a constant risk of malfunction. It would be preferable if you checked them for frayed wiring or loose connectors.

Brake Pedal Button

To determine if you depress the brake pedal, several onboard computers use a signal from the brake pedal.

Many vehicles require the driver to depress the brake pedal before starting the engine. A broken button will cause problems with the engine not starting. Additionally, the ASC alert message will be activated even if you can start the engine.

Wheel Misalignment

Different tire sizes, uneven wear, and alignment issues might affect how quickly the wheels spin or interfere with the steering wheel angle sensor.

The ASC computer frequently makes mistakes in computations as a result of improbable readings from the ABS or steering wheel sensor. If a 4WD system is installed, this will then turn it off to prevent harm.

Even though the ASC system doesn’t influence how the car drives, it’s a smart safety precaution, especially in risky circumstances.

Signs Of A Poor ASC System

If the ASC is ineffective, the traction control safety feature will be disabled. In bad weather, maintaining control over the vehicle could be more challenging. 

The traction controller (TCS) can be turned on or off at all times, and the ASC warning indicator light can be turned on in the dashboard. The following are the main signs:

Inoperative ABS system

System service ASC ABS failure may be connected to the needed message. Loss of anti-lock braking system (ABS) functionality could happen if the traction control and the ABS are integrated into a single module. 

One or more sensors or wires to the sensors are frequently involved. The most frequent ABS issues are from sensors that have been contaminated with debris or metal threads.

Dismissals also occur when the sensor wiring is damaged, intermittent, and without continuity.

Traction Light Is Always On

Some vehicles come equipped with a switch that lets the driver turn on and off the traction control system. To prevent traction loss and wheel spiv, this may be necessary. 

It might be possible to maintain traction control if the traction control module malfunctions or fails, even with the switch off.

It might not be able to turn off the traction control either. This could suggest a malfunctioning traction control module, but it could also mean that the traction control switch needs to be replaced if it is not working properly. It is essential to comprehend that.

Wheels Breaking Traction

It may be more difficult to maintain vehicle control in braking situations, such as on ice or in heavy rain, when the traction control module malfunctions or is failing. 

Together, the traction control system and the ABS prevent hydroplaning by maintaining control. Together, the traction control system and control system function.

The traction control system does not typically engage in cars that do not have enough hydroplane length. 

But it won’t be able to assist in keeping the car under control during any hydroplaning incident if the traction control system isn’t working properly.

Engine In Limp Mode

A motor and gearbox safety feature is the limp mode. The motor or transmission unit detects a seriously erroneous engine or transmission parameter, and the automobile enters limp mode. 

In order to move your car to a repair without damaging the motor, the limp mode frequently reduces power and limits the RPM of the engine.

How To Fix ASC System Service Required Warning?

When the service is required, there are a few key actions you can do. One significant issue that causes an ASC light to appear in an automobile is an erroneous ABS speed sensor.

The others are a broken ABS pump, a malfunctioning angle sensor, and a blown fuse. Additionally, different onboard computers use a signal from the brake pedal to determine if you’ve applied the brakes.

A malfunctioning switch will cause a non-start issue because most automobiles prevent the driver from starting the vehicle unless you hit the brake pedal. And even if it does, the alert message will still be sent.

Tires that are unevenly worn or misplaced might also throw off the wheel angle sensor or the wheel spin velocity difference.

When ASC Service Required appears, remain composed to identify the primary cause and employ the best technique to address the issue.

You will need specialized equipment if you wish to identify the causes of the ASC warning light. More specifically, you require an OBD-II ABS scanner, sometimes known as an ABS code reader.

Follow this guide:

  • Connect the OBD-II port underneath the car’s dashboard to the ABS scanner.
  • Activate the scanner.
  • Select the Mitsubishi icon from the menu.
  • Choose anti-lock brakes.
  • Turn on read code mode.
  • The scanner will then swiftly look for any potential issues.
  • After that, fix the incorrect codes and naturally pass the saved codes.

Final Thoughts

ASC system maintenance is essential to regular vehicle operation. Whenever the ASC system malfunctions, never disregard or skip the message. Otherwise, you can find yourself in a number of bad mishaps.

Perform the diagnosis procedure to get your car fixed quickly and correctly. Consequently, you can keep yourself safe and increase the engine control’s lifespan. Hope you can find it useful!

Leave a Comment