Can Plasti Dip Go Through A Carwash?

Plasti Dip is a well-known rubberized coating that is used to improve and protect the appearance of cars. However, one concern remains: Can Plasti Dip go through a carwash? 

While Plasti Dip is well-known for its durability, its ability to withstand automated car washes is dependent on a number of conditions.

Plasti Dip can endure car washes in general, including touchless and brushless choices.  However, severe or abrasive washing has the potential to harm or peel the Plasti Dip coating.

Let’s find out how Plasti Dip can pass through a carwash in this post. We will also show you how to wash your automobile properly so that the plasti lasts longer. 

Can Plasti Dip Go Through A Carwash?

The answer is dependent on numerous things. Plasti Dip, when correctly applied and thoroughly cured, produces a flexible and durable barrier that is resistant to water, detergents, and light agitation. As a result, it can often tolerate car washes, including touchless and brushless options, without any difficulties.

Touchless car washes are generally regarded as safe for Plasti Dip. These car washes employ high-pressure water jets and detergents to remove dirt and grime from the vehicle’s surface. Because they do not entail physical contact, they are less likely to damage or peel off the Plasti Dip coating.

Brushless car washes, which replace brushes with rotating soft cloths or foam strips, are also generally safe for Plasti Dip. The mild nature of the products used in these car washes reduces the possibility of coating damage. It should be noted, however, that some low-quality brushless car washes may cause the Plasti Dip to peel or chip.

Car washes that use brushes or high-pressure jets, on the other hand, have a larger risk of damaging the Plasti Dip coating. The hairs of the brushes or the power of the water might cause friction, causing the Plasti Dip to peel or lift. Some vehicle washes employ harsh chemical cleansers that might harm the covering over time.

How To Protect Plasti Dip When Washing Car?

Taking basic care when washing an automobile with Plasti Dip can help protect the coating and extend its longevity. Here are some important pointers to remember:

Choose Gentle Cleaning Methods

When possible, use a touchless or brushless auto wash. These procedures avoid direct contact with the Plasti Dip, lowering the possibility of damage or peeling.

Hand-Wash With Care

If you want to wash your automobile by hand, use a light automotive detergent designed exclusively for fragile surfaces. Harsh chemicals, solvents, and degreasers should be avoided since they might destroy the Plasti Dip over time. Scrub the surface lightly with a gentle sponge or microfiber cloth.

Rinse Thoroughly

Rinse your vehicle completely with water before washing to eliminate any loose dirt or debris. This procedure prevents the Plasti Dip from being scratched or damaged during the cleaning process.

Use A Soft Touch

When washing, use gentle, circular strokes and light pressure. Scrubbing too hard or using abrasive items can cause the Plasti Dip to peel or chip.

Dry Carefully

After washing, dry the vehicle with a gentle, clean microfiber cloth or chamois. To avoid lifting or harming the Plasti Dip, pat it dry rather than rubbing it.

Protect Against High-Pressure Water

Direct high-pressure water jets, such as those produced by power washers, can be too harsh for Plasti Dip. Keep a safe distance during rinsing and avoid directing the water stream directly at the coated areas.

Perform Regular Inspections

Examine the Plasti Dip coating on a regular basis for signs of wear, peeling, or chipping. To keep the protective layer intact, touch up any damaged areas as soon as possible with Plasti Dip spray or dip coating.

Avoid Abrasive Materials

When cleaning, avoid using abrasive brushes, sponges, or cleaning instruments that can scratch or harm the Plasti Dip. To protect the coating, use soft and non-abrasive materials.

Use protective sprays

A protective spray or sealer designed for rubber or vinyl surfaces can provide an additional layer of protection for the Plasti Dip coating. For optimal application, follow the product instructions.

You can easily protect your Plasti Dip coating when washing your car if you follow these instructions. Taking care and employing mild methods will help maintain the coating’s beauty and lifespan, allowing you to enjoy its benefits for a prolonged period of time.

Final Thoughts

Finally, high-pressure water jets, strong cleaning chemicals, and mechanical brushes commonly found in carwash systems can harm or remove Plasti Dip. While Plasti Dip may hold up in particular carwash conditions, it is typically recommended to avoid potential damage. To safeguard your Plasti Dip, hand wash your vehicle using gentle techniques and light soaps. This will ensure that the coating remains intact for a longer period of time.

Leave a Comment