Reasons for The Chevy Trailblazer Door Lock Problem?

The owners of the Chevy Trailblazer may easily lock and unlock the car with the touch of a button on the key fob. Let’s learn more about the Chevy Trailblazer door lock problem.

Dead coin batteries inside the key fob are the most frequent reason for the Chevy Trailblazer door lock problem. But other factors that can cause a remote control to stop operating include worn buttons, faulty electrical chips, water damage, receiver module problems, signal interference, dead batteries, etc.

Car lock problems are actually a typical occurrence. The door may occasionally remain unlocked if the lock malfunctions. This problem can arise for a variety of causes. To safeguard the safety of your car and the valuables within, it is essential to find the root cause and rectify it.

In this article, we’ll go through some of the numerous causes and the way to fix the Chevy Trailblazer door lock problem.

Reasons for Chevy Trailblazer Door Lock Problem

When you leave your car, do your power locks lock it or prevent you from getting in? You need to be aware of what’s wrong and do something to stop it. Your Chevy door lock may not be functioning for a number of typical causes.

Key Fob Problems

Short-range transmitters have been included into key fobs. The button on the key fob sends radio wave signals to your car. Your car’s doors can open and close thanks to these signals. 

Batteries, which are found in key fobs, are prone to running out after a while. The fob chip loses power when the battery dies and is unable to open or close your automobile doors. Make sure you have extra batteries or a backup key on hand to avoid similar inconveniences.

When purchasing a new battery for the key fob of your Trailblazer, keep in mind that the battery may be sitting on the shelf for a long time. Therefore after replacement it may not work, or may not last that long. Try purchasing the battery from a store where stock moves fast. If you still can’t get the key fob to work after verifying that the battery is healthy, your key fob issues may not be due to a bad battery.

Besides, the key fob’s misaligned buttons and broken contacts are a serious problem as well. To see if the key fob has any problems, you can open it.

Dirt

A barrier to closing the door could include dust, filth, or worn-out rubber fragments. Using a Chevy fob will make it simple to identify. Lock the car and give the sound serious attention. If the door makes a lock sound but won’t open, there is likely a physical barrier keeping it closed. You can use any lubricant or WD40 for a fast remedy, but it is preferable to see a professional for thorough car detailing.

Broken fuse

The most frequent obstacle to correctly locking doors is a blown fuse. This fuse controls whether the car doors lock or unlock. The fuse can blow owing to high voltage and is often found under the glove box on the passenger’s side. The fuse may be simply changed at home and is less expensive. It must be fixed right away if you want to keep someone from breaking into your Chevy.

Malfunctioning Solenoid

An electromagnet known as a solenoid is a component of contemporary locking mechanisms. It is one of the list of cutting-edge safety measures for automobiles. It causes the doors to lock or unlock by connecting the plunger to the latch. 

Each door has its own solenoid; if the central locking on one of the doors is not functioning, the solenoid may be to blame. It’s convenient to fix it. Locate the old solenoid, then swap it out for the new one by removing the door panel.

Unstable Wiring

The control unit in a car is connected to every electrically powered system in the vehicle. A complicated network of cables that travel throughout the vehicle is created by this connection. The doors of your car won’t lock if the wiring is loose or damaged. The wiring problem is a complicated issue that calls for expert help. You will need tools to find it, even if it’s a minor fixture.

Water Stains

Water damage is quite likely if your Chevy Trailblazer key fob accidentally fell into the washing machine’s soapy water while it was still in your jeans pocket.

Rubber seals on your Trailblazer key keep water from getting to the electronic chip within. Light rain or a splash of water should not harm the chip, but prolonged exposure to water, such as dunking the key in a pool, can cause the water to seep through the seals and cause damage. Due to salt water’s highly conductive nature, submerging the key in ocean water at the beach may cause far greater damage to key fob electronics.

It doesn’t make the Trailblazer key fob waterproof; it just means you were lucky if it survived a wash cycle, a deep soak in the ocean, or a dip in the pool. You shouldn’t make this a habit since prolonged exposure to water increases the likelihood of water damage.

Incorrect Receiver Module

The remote keyless system receiver in the Chevy Trailblazer picks up radio frequency signals from the key fob. It’s likely that the receiver module has developed a defect if none of your key fobs function and you are unable to reset the keys.

To find the problem, additional diagnostic testing could be necessary. Either the module isn’t speaking to other modules on the car, or the keyless entry antenna may be broken. In these circumstances, an OBDII scan tool can be used to check whether the security module is receiving and responding to the orders.

How To Fix the Chevy Trailblazer Door Lock Problem?

In the section above, we mentioned nearly all of the causes of Chevrolet Trailblazer door lock problems. Let us now work together to find a solution.

Diagnosis

A fault diagnosis might give preliminary clues of the location of the defect because the Chevy Trailblazer has on-board diagnostics (OBD). This approach will be very helpful for identifying a defective receiver module in a remote keyless system.

Connect the diagnostic tool to your Trailblazer before starting troubleshooting. Under the dashboard is often where the OBDII connector is found. Connect the tool and start the engine. Next, the majority of diagnostic tools will inquire about the car.

You must input this completely accurately or the search result might not be accurate. You often need to enter the Car Identification Number in addition to the brand, model, and type of engine for the vehicle (VIN). If you enter additional information about your Trailblazer, the scanner will be able to provide you with more precise information because some OBD codes are manufacturer-specific.

Reset Your System

If your Trailblazer’s keyless entry system has malfunctioned and the key fob isn’t functioning as a result, you might be able to fix it by resetting the system.

The Trailblazer lacks a button or menu item to reset the keyless entry system. However you may restart all the on-board computers by temporarily unplugging the 12 volt battery. Before removing the cable from the battery’s positive terminal, disconnect it from the negative terminal. 

To remove any remaining electricity from the system when the battery is unplugged, turn on the headlights and repeatedly push the horn button. Reconnect the batteries in reverse order, starting with the positive cable and moving to the negative cable, after around 15 minutes.

Dry Your Fob

After being exposed to rain or clean tap water, your TrailBlazer key fob may cease functioning. In this case, remove the battery right once, wipe the electronic component with paper towels, and then replace it after it has completely dried. 

Cleaning the chip with isopropyl alcohol or electronic cleaning is advised in the event that it has been exposed to salt water, soapy water, or unclean water. The chip is likely fried and you will need to purchase a new key if the key fob still does not function after cleaning and drying.

Final Thoughts

There are numerous causes for your Chevy Trailblazer door lock problem. When looking for the cause, begin with the most evident and easily diagnosed cause. We hope you found this post useful. If you have any questions, please leave them in the comments section.

Leave a Comment