6 Chevy Express Van Sliding Door Problems? (Explained)

Chevrolet is a reliable family vehicle with electronic sliding doors. When the Chevy sliding doors work properly, they are really convenient. When they start having problems opening and shutting, though, you could desire traditional automobile doors. 

Manual and electric sliding doors both have issues, although the electric mechanism is significantly more difficult to repair than the manual doors.

There are many chevy express van sliding door problems. They can get stuck, preventing the car from closing the door. Sometimes it makes loud noises that make drivers and passengers uncomfortable. Sometimes the control part has a problem so the door cannot move.

However, these problems are not of concern. They can be easily remedied once the exact cause is found. Below we will list for you common Chevrolet sliding door problems and related fixes.

How many Chevy express van sliding door problems?

This is a modern automatic door line, but there are still many problems around. Here are a few typical examples.

1. Difficulty opening and closing

Sliding doors in Chevys operate on rails or guideways. Long-term use will cause dirt to build, and water may occasionally leak into it.

Dirty tracks will not fully lock the sliding door, but they will make it more difficult to open and close.

Water-contaminated grease will be less effective and create rust in difficult-to-reach areas. The friction between the rollers and the track is increased by dirt.

We can clean the rails with a rag and add new grease to solve this problem.

2. Sliding doors not opening

When the fuse blows, the door controls stop working completely. Checking for a blown fuse is simple and may be done by yourself. Of course, manual sliding doors are an exception.

On the driver’s side, the fuse is normally positioned behind the dashboard. Let’s have a look; it’s easy to find.

Replace it with a new one if it has blown. Your problem should be fixed. If the fuse is fine but the doors are still not working, the issue is elsewhere.

3. Sliding doors can not open?

The little release motor simulates the action of pulling the door handle open. It pulls a cable that releases the sliding door’s latch. When the little release motor fails, the huge power slide door motor will continue to attempt to open the door but fail.

It’s a little motor that doesn’t cost a lot of money to replace. However, because the door card must be removed, accessing it can be a little cumbersome. Remove the primary release unit after removing the door card. You’ll find the release motor and some cogs if you disassemble it.

4. Sliding Door Will Not Close

For a variety of reasons, sliding doors do not close entirely. Because there is an obstruction on the threshold, the first can be indicated. Check if any object has auto-reverse enabled. When the sensor detects an obstacle on the threshold, the door will reverse or not close at all. Remove any obstacles from the threshold.

If a piece of rubber has come loose or is in the wrong place, sliding doors will refuse to close entirely. Make sure the rubber is in place and the door is in place.

If it doesn’t work, turn on the car, then turn off the toggle for about a minute before turning it back on. Close the doors completely by pressing and holding the two sliding door buttons at the same time.

5. Door makes noise 

When the sliding door assembly is damaged, the door frequently detaches from the hinges and floats freely inside the side compartment. The door will make a noise every time it contacts the assembly if this happens. If you notice this warning sign, you should contact a mechanic as soon as possible to get the problem fixed.

You might hear a low-pitched noise coming from the door if the motor assembly is starting to wear out, as though the motor is struggling to run. This is usually caused by the door dragging or becoming snagged on something that prevents the motor from closing or opening the door freely.

6. When you try to open or close a door, it grinds against metal

When your sliding door opens or closes, it makes a grinding sound, which means your motor door assembly is wearing down quickly. The sliding motor door assembly can be fixed if you find the problem quickly. This noise may cause your window to become stuck, making it difficult to close.

The sliding door motor assembly is a component that should last the life of your vehicle. Frequent use, button abuse, or automobile accidents, on the other hand, may result in damage.

Read more: What Is The Best Material For Car Door Panels?

How to fix it!

One of the most important things to remember while extending the life of your vehicle is to take proper care of it. When it comes to preserving the function and performance of your car, proper maintenance is essential. Here are some tips for keeping your Chevy sliding doors in good working order:

Remove any trash and filth.

Automatic sliding doors are a kind of smart door, they are very sensitive to obstacles. If there is dirt or dust on the window grooves, it can also make it difficult for them to move. Please clean up dirt and garbage to make them work more smoothly.

Maintain a greased track.

Like standard door grooves, sliding door grooves require oil for lubrication. They can create noises when moving if they are too dry. This can make the people around you feel uncomfortable. Furthermore, if not repaired promptly, they can rust. Please remember to grease the door on a regular basis to preserve its durability.

Keep the sensor button intact.

The sensor button makes it simple to unlock your door. You should only press the button with enough force. The button may become paralyzed or dyssensitive if pressed too firmly. This will make controlling the door at will difficult. As a result, keep this in mind.

Car upkeep is essential.

A healthy body is one that is checked and nurtured on a regular basis. So does your automobile. Bring them in for a yearly or semi-annual checkup with a specialist. People with extensive knowledge will assist you in determining the “diseases” of the car that you are unaware of. To extend their lives, take good care of them.

Frequent Asked Questions

Q: Why is a sliding door on an automobile not preferred?

The main reason for this is that the sliding mechanism raises the cost of the car. It’s also inconvenient for passengers to open because it requires more force than hinged doors. It also doubles the weight of the car, making it twice as heavy as cars with hinged doors.

Q: How does a car’s sliding door work?

A notched track connects the car sliding doors to the vehicle’s frame. An electric motor inside the door rotates a metal rod wrapped in a plastic housing, which in turn turns the gear. The wires that connect the door to the track run along the bottom of the track and can move with the door.

Q: What is the mechanism behind automated automobile doors?

The electric car door lock receives a radio signal from the car key fob, which activates the actuator, which then sends the command through the proper path (lock/unlock) and performs the appropriate action.

Final thoughts

Chevy express van sliding door is an advanced product that saves maximum space. Besides, they make the movement of passengers more convenient because they do not have to open and close by hand. However, there are also many problems with this type of door that we listed above. Hope the article is useful to you. If you have any questions, please comment below or send a message to us.