Reasons That Remote Start Not Working And Check Engine Light On? 

Does the remote start not working and check engine light on a frequent error in your car?

The motorist won’t be able to operate his or her vehicle remotely if the remote control malfunctions.

It further restricts the vehicle’s safety features in addition to reducing convenience. When the remote control breaks, it is frustrating if you drive every day.

Additionally, the check engine light being on is a cause for concern. The prominent Check Engine light indicates an urgent need for repair of the engine system or associated parts.

These two issues frequently coexist. In practice, automotive remote controls are fairly basic gadgets that only use frequency to communicate.

The car fault check light will illuminate when there is an issue with the key. They report a problem, therefore you need to check the car right now.

The post will go over the causes of the check engine light being on and the key not working. Read this carefully.

Reasons Why The Remote Start Not Working and Check Engine Light On

There are many reasons leading to this condition of the key and the Check Engine light. All details are revealed below.

The key’s battery is dead

Every car’s remote key runs primarily on batteries, which communicate directly with the transmitter included inside the magnetic key.

Most automotive remote control keys are powered by lithium batteries that resemble little silver coins. Because of this battery’s extremely extended shelf life, it frequently takes drivers a while to run out of battery.

The initial cause of the remote key not working could be a dead battery.

You can employ a car key replacement service or order replacement batteries online from nearby shops.

The Remote Transmitter or Receiver is Malfunctioning

According to the article, a remote control key operates on basic transmission principles related to transmission and reception.

This remote control key set communicates with the receiver box by exchanging signals. Signals indicate that a specific action is being carried out.

If the remote key transmitter is damaged, it will not be able to connect to the vehicle’s receiver box or the connections inside the trigger circuit, preventing it from reaching the remote transmitter.

If the remote transmitter is damaged, you will have a difficult time repairing it yourself. As a result, you will require the services of a professional auto locksmith to resolve this issue.

Key is Not Programmed

The remote control will not work if it has not been programmed to control the vehicle. This is not a common issue for first-time car owners. This frequently causes problems for used car owners.

Car Battery is Depleted or Dead

When the battery dies or the voltage drops, the key control signal boxes stop working and pressing the key no longer works.

Spark Plug

A spark plug malfunction, such as a dirty spark plug, a damaged spark plug connector, or a damaged high-voltage wire, is usually the source of the Check Engine light error.

These errors can cause the spark plugs to emit weak sparks or at the incorrect time, which has a significant impact on the combustion of the gas and fuel mixture.

This reduces engine efficiency, resulting in vibration, jerks when accelerating, difficulty starting, and stalling…

Car Ignition

The car igniter is in charge of generating a high voltage current so that the spark plug can generate an electric spark, which ignites the gas and fuel mixture in the engine cylinder.

The spark plugs will be affected if the igniter fails. Severe spark plugs may fail to ignite, causing the engine to stall. As a result, when the car’s ignition fails, the Check Engine light usually turns yellow.

Injectors for Gasoline

Fuel injectors contribute to the combustion process by supplying fuel to the combustion chamber.

Injectors that have not been cleaned in a long time are easily clogged, and blocked by deposits, rust, and other debris, greatly affecting engine performance.

When the ECM detects a faulty injector, the Check Engine light illuminates to alert the driver.

Fuel Tank Cap

The vehicle will also report a Check Engine error if the fuel tank cap is not covered. So, if the Check Engine light comes on, one of the first things you should do is check the fuel tank cap.

Evaporative Emission Control System(EVAP)

The gasoline vapor control system (EVAP) absorbs gasoline vapors as they pass through the filter on their way to the combustion chamber, preventing gasoline vapors from escaping from the fuel tank. When this system fails, the vehicle will display a Check Engine light error message.

Exhaust Gas Recirculation (EGR)

The exhaust gas recirculation (EGR) system is in charge of reintroducing exhaust gas into the intake air in order to reduce NOx concentrations. The exhaust gas recirculation control valve or this pipeline system may become clogged after a long period of operation due to dirt and soot. The ECM system will then illuminate the Check Engine error light to alert you.

Thermostatic Control Valve

The thermostatic valve controls the circulation of coolant to keep the engine cool. For optimal engine performance, the thermostatic valve maintains a cooling temperature of 176 to 203℉.

However, over time, the valve may develop issues such as becoming stuck. This reduces the cooling effect and causes the engine to overheat. The machine may freeze if not handled quickly.

When the ECM detects a faulty thermostat, the taplo illuminates the Check Engine light.

Sensor for Intake Air Flow

The intake air flow sensor measures the flow of intake air entering the engine and sends the signal to the ECM, which calculates and adjusts the appropriate amount of fuel and ignition timing.

However, after a long period of operation, this sensor becomes susceptible to dust and dirt, causing the transmitted information to be incorrect and affecting the entire system. As a result, if it detects that the intake air flow sensor is faulty, the Check Engine light icon will illuminate to alert you.

Oxygen Sensor 

The oxygen sensor measures the amount of residual oxygen in the engine exhaust gas and sends the signal to the ECM. Following that, the ECM will optimize the fuel, gas, and ignition timing ratios.

When the oxygen sensor fails, the information is incorrect, and the combustion process is no longer effective, causing the vehicle to consume more fuel to compensate. As a result, if the Check Engine light comes on, the oxygen sensor has most likely failed.

Also read: Toyota Corolla Engine Noise When Cold – How To Know?

What Should You Do When Remote Start Not Working and Check Engine Light On

As previously stated, if your remote does not work, consult a professional immediately, as does the check engine light issue.

If the Check Engine light is illuminated, the engine can still operate normally if the vehicle has minor issues.

However, you should not be subjective because if you do not fix it right away, the car’s condition will worsen.

Because the engine’s operation consists of numerous components. When one component fails, it can have a domino effect on many others.

For the sake of safety, the driver should limit the vehicle’s speed to less than 40 km/h at this time. Then immediately take the car to the garage to have the error checked.

If the Check Engine light continues to blink, it indicates that there is an emergency situation, such as the engine overheating or the catalyst overheating.

Continued movement can seriously harm the vehicle’s operating system, even causing it to catch fire. As a result, it is best to find a safe place to pull over and call an ambulance to pull the car into the garage for inspection.

There are numerous reasons why the Check Engine light is illuminated. As a result, checking each component will be time-consuming and laborious. As a result, professional mechanics frequently employ car error readers.

This type of machine aids in determining the precise error of the vehicle in question. This allows for faster and more accurate error correction.

There are also numerous types of error readers on the market, as well as inexpensive and compact car error testers. If car owners want to inspect the vehicle for themselves, they can purchase one.

Final Thoughts

If you experience any of the problems listed above, you should see a mechanic right away. I hope you found this article to be informative. If you have any questions, please leave them in the comments section below and we will respond as soon as possible.

Leave a Comment

Read more